The top panel is cutted out now and loosely screwed to the frame.
I have to install several parts inside the frame,
thus the top needs to be removeable for the next days.
To raise up my motivation I have made a quick mockup.
Very crude, I just leaned four wheels against the frame and the designed ground clearance was provided by my old battery charger and a toolbox under the frame bottom.
Wheel size is 24'' all around
The narrow track of the front wheels will be widened to 110cm/44''
when the axle will be installed
The two beams behind the front wheels will take up the bottom brackets and cranks
First "test ride"
Amelie on the back seat
So long...
Kai
Keine Kommentare:
Kommentar veröffentlichen